No products in the cart.
Viatek – Night Stars Landscape Laser Lighting Premium Series (Red, Green & Blue with Remote)
Night Stars Premium Series Red, Green, and Blue Laser light projects a single, duo, or trio of colors and features an optional flash/pulse setting. Use the included wireless remote control to set the timer options and light display speed. With up to 3000 square feet of coverage, you will dazzle your neighbors, friends, and family with this spectacular, hassle-free decorative light that’s perfect for holidays and everyday!
Night Stars Landscape Lights are decorative lights that are ideal for both indoor and outdoor use. It projects points of brightly colored lights onto walls, dance floors, landscapes, pools, gazebos, etc. Create an instant atmosphere for parties and entertaining or add a splash of color and interest to your home, yard, or garden. It projects red, green, or a combo of the two colors as well as an optional flash/pulse setting. The included Radio Frequency remote lets you control your Laser Light from anywhere in and around the house (not just close by to the light). The built-in timer runs for 2, 4, 6, or 8 hours and is also programmed from the remote.
- Coverage: 50′ x 50′
- Temperature Rating: -30 Degrees F to 140 Degrees F
- Timer: 4, 6 & 8 Hour Daily Cycle
- Patterns: None, Red, Green & Blue Lasers w/ Flash
- Power Button: Yes
- Motion: No
- Remote: Yes
- Power Cord: 25ft
- Matterial: Cast Aluminum
- Low Voltage Power Consumption
- Rain Tight
Syncing Your Remote:
DO NOT PLUG IN LASER UNIT UNTIL PROMPTED IN THE STEPS BELOW. If you already have, unplug it and then follow the steps below, in order. First, install the included 23A battery in the remote. To test the remote’s battery connection, press any button and the LED will illuminate for 1 second. If the LED does not illuminate, check to make sure you have installed battery according to the correct polarity.
Syncing the remote: With your remote ready (battery installed) and making sure you are within range of the laser, plug in the laser power supply adapter to a power source. Within 5 seconds of plugging the laser in, press the ON/OFF button on your remote to sync it with the laser. Occasionally, re-syncing the remote with the laser may be necessary. To re-sync, remove the battery from the remote. Unplug the laser unit from the power source for 1 minute then repeat “Syncing the Remote” steps above.
SPECS & FEATURES:
|Special Features:||Projects brilliant points of red, green, and blue light|
|Laser(s):||Red, Green, Blue|
|Light Display:||Select between red, green, or blue lasers, or a combination of lasers|
|Coverage:||3,000 Square Feet|
|Timer Settings:||Select 4, 6, or 8 hour daily cycle|
|Flash Settings:||Optional flashing lasers with speed control|
|Unit Control Panel:||Power/Mode button on back|
|Remote:||Advanced RF Remote|
|Housing Material:||Cast Aluminum|
|Spike / Mounting Plate Material:||Cast Aluminum Ground Stake / Mounting plate not included|
|Cord Length:||20 ft|
|Power Consumption:||Low voltage and low power consumption with UL power adapter|
|Indoor/Outdoor Rating:||Rated for indoor and outdoor use|
|Weather Resistance:||Weather resistant, it stands up to snow, sun, wind, and rain|
|Temperature Rating:||-4° to 90° F (-20° to 32° C)|
|Heating Element & Cooling System:||Internal heating and cooling system keeps your light working properly within temperature rating|
|Cord & Transformer Weather Rating:||Rated for Outdoor Use, UL Listed: E149474 3G58|
|Power Input:||120V~ 60Hz 0.27A Max|
|Power Output:||12V DC 1.08A|